Powder Coating, RAL Color - Hardware Industry Service - Hardware Industry Tooling & Services - Machinery & Parts - Products - Asia-Switch.com

Powder Coating, RAL Color

Delivery term:The date of payment from buyers deliver within days
  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Beijing

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-30 22:25

  • Browse the number:

    181

Send an inquiries
+
Yangzhou Senyida Coating Equipment Manufacturing Co., Ltd.
Contactaixin:

Contactaixin:

senyidacoating(Ms.)  

telephone:

Area:

Beijing

Address:

No. 36 Huayang Industry Park, Xiaoji Town, Jiangdu Dist, Yangzhou, Jiangsu, China (225242)

Website:

http://www.asia-switch.com/com/senyidacoating/

+
Model Number: RAL-0006 Brand Name: senyida Key Specifications/Special Features: 1. General introduction: Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion, crushed and sievedProducts are stable at room temperature storage, then baking heat melted and solidified to form smooth and bright permanent coating to achieve the purpose of decoration and corrosion2. Features: 1). Products are nontoxic, solvent-free and nontoxic volatile substances, there are no intoxication, no fire, no three wastes emissions and other pollution problems, in full compliance with national environmental laws 2). Raw material utilization is high, the highest utilization rate even more than 99%3). After being pre-coated handle, disposable construction, without primer, you can get a sufficient thickness of the coating, easy to automate operation, high production efficiency, reduce costs 4). Dense coating adhesion, good impact strength and toughness, high
coverage corners, with excellent resistance to chemical corrosion and electrical insulation properties
5). Powder coatings storage and transport are safety and convenience
3. Product series:
Products include high light (above 86%), glazed (76-85%), matte (20-50%), low light (below 20%)
We also offer variety of shiny products according to the needs of users
4. Powder physical properties:
Proportion: 1.2-1.8 (depending on the color and gloss)
Particle size distribution: 100% less than 125 microns (more than 85% between 60 to 90)
Liquidity (180°C): 22-35mm
Curing conditions: 200°C, 10 minutes
5. Average coverage:
8-10m/kg, the membrane is 60μm (calculate by 100% utilization rate of powder coating)
6. Packing:
Carton packing, lined with double polyethylene bag, net weight 20kg
7. Storage requirements:
Store below 30°C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited
Coating performance
Test items Inspection standards Test indicators
High light glazed/matte/low light
Impact resistance ISO 6272 GB/T1732-1993 50kg/cm 40kg/cm
Cupping test ISO 1520 GB/T9753-1988 8mm 7mm
Adhesion (grid method) ISO 2409 GB/T9286-1998 0
Bending ISO 1519 GB/T6742-1986 2mm 3mm
Pencil hardness ASTMD3363 GB/T6739-1996 1-2H
Salt spray test ISO 7253 GB/T1771-1991 >500 hours
Damp heat test ISO 6270 GB/T1740-1979 >1000 hours
Heat resistance 110°C/24 hours (white) good gloss retention, E≤0.3-0.4
Florida weathering exposure ISO 2810 South 45 °,12mons gloss retention≥50%
Artificial accelerated aging 60°C/8 hours + 50°C/4 hours condensing, cycle for 500 hours gloss retention: ≥50%
color stability:E≤0.35
Annotate: 1. Above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns
2. Above coating performance may be lower as shiny and slightly lower
Shipping Information:
  • FOB Port: Shanghai
  • Lead Time: 15 - 30 days
  • Dimensions per Unit: 85 × 68 × 70 Centimeters
  • Weight per Unit: 205 Kilograms
  • Units per Export Carton: 20
  • Export Carton Dimensions L/W/H: 38 × 27.5 × 29.5 Centimeters
  • Export Carton Weight: 80 Grams
Main Export Markets:
  • Asia
  • Australasia
  • Central/South America
  • Eastern Europe
  • North America